Search results for " wind energy"
showing 10 items of 14 documents
Short term wind speed prediction using Multi Layer Perceptron
2012
Among renewable energy sources wind energy is having an increasing influence on the supply of energy power. However wind energy is not a stationary power, depending on the fluctuations of the wind, so that is necessary to cope with these fluctuations that may cause problems the electricity grid stability. The ability to predict short-term wind speed and consequent production patterns becomes critical for the all the operators of wind energy. This paper studies several configurations of Artificial Neural Networks (ANN), a well-known tool able to estimate wind speed starting from measured data. The presented ANNs, t have been tested through data gathered in the area of Trapani (Sicily). Diffe…
Semiactive control for floating offshore wind turbines subject to aero-hydro dynamic loads
2011
Wind and wave dynamic loads might cause undesirable vibrations that affect the structure integrity and system performance of floating offshore wind turbines. This paper addresses the problem of dynamic load mitigation by using semiactive control techniques with the tuned liquid column dampers placed on the turbine’s tower. The control law is formulated based on the mixed H2/H∞ methods for ensuring the system stability and reliability. Furthermore, the proposed controller only uses output feedback so as to avoid the dependence on the knowledge of the states of the system. Peer Reviewed
Assessment of the technical and economic potential of offshore wind energy via a GIS application: A case study for the Sicily Region according to Ita…
2015
This paper presents a technical and economic analysis of the possible exploitation of offshore wind resources using spatial analysis methods based on GIS tools. The study assessed the magnitude and distribution of the main constraints on installation of wind farms by taking into account the relevant technical factors and local laws on nature protection issues in a specific area, i.e., Sicily. Specific cost functions were defined for several components of the total cost of construction and maintenance of a wind farm. Several scenarios were implemented according to wind turbine size, hub height, total wind farm power, and distance from the coast, and the levelised production cost was assessed…
Computer Aided Optimization Via Simulation Tools of Energy Generation Systems With Universal Small Wind Turbines
2012
This paper considers the general issues in the project and the optimization of energy generation systems using small universal wind turbines, suitable in Distributed Generation (DG) and computer aided optimization for a better exploitation of wind source. Optimization in this field reveal to be more and more important because the local generation and consumption of electrical power, even for grid connected generators can suffers for unevenness of wind source exploitation, also in terms of wrong directions and in not regular wind flows. Computer aided design and optimization of small plants may give significant improvements in the development of the wind source also in accordance with the pr…
Minimum Leading Edge Protection Application Length to Combat Rain-Induced Erosion of Wind Turbine Blades
2021
Leading edge erosion (LEE) repairs of wind turbine blades (WTBs) involve infield application of leading edge protection (LEP) solutions. The industry is currently aiming to use factory based LEP coatings that can applied to the WTBs before they are shipped out for installation. However, one of the main challenges related to these solutions is the choice of a minimum LEP application length to be applied in the spanwise direction of the WTBs. Generally, coating suppliers apply 10–20 m of LEP onto the blades starting from the tip of the blade using the “rule of thumb”, and no studies in the literature exist that stipulate how these LEP lengths can be calculated. In this study, we extend the sc…
Efficient Wide-Bandgap Mixed-Cation and Mixed-Halide Perovskite Solar Cells by Vacuum Deposition
2021
Vacuum deposition methods are increasingly applied to the preparation of perovskite films and devices, in view of the possibility to prepare multilayer structures at low temperature. Vacuum-deposited, wide-bandgap solar cells based on mixed-cation and mixed-anion perovskites have been scarcely reported, due to the challenges associated with the multiple-source processing of perovskite thin films. In this work, we describe a four-source vacuum deposition process to prepare wide-bandgap perovskites of the type FA1-n Cs n Pb(I1-x Br x )3 with a tunable bandgap and controlled morphology, using FAI, CsI, PbI2, and PbBr2 as the precursors. The simultaneous sublimation of PbI2 and PbBr2 allows the…
Extensible Wind Tower
2014
The diffusion of wind energy generators is restricted by their strong landscape impact. The PERIMA project is about the development of an extensible wind tower able to support a wind machine for several hundred kW at its optimal working height, up to more than 50 m. The wind tower has a telescopic structure, made by several tubes located inside each other with their axis in vertical direction. The lifting force is given by a jack-up system confined inside a shaft, drilled below the ground level. In the retracted tower configuration, at rest, tower tubes are hidden in the foundation of the telescopic structure, located below the ground surface, and the wind machine is the only emerging part …
Evaluating the Performances of Small Wind Turbines: A Case Study in the South of Italy
2012
AbstractAmong renewable energy resources, wind energy became more attractive in the last decade. Wind farms installations dramatically increased in areas where climatic conditions, topography and environment have allowed their development. The installation of wind turbines, usually carried out in remote areas, recently began to cover areas identified by a complex terrain such as urban and suburban zones. Although these new sites’ choices are characterized by lower productivity there is increasing interest in wind energy production in both urban and suburban area. In this work the authors have carried out an energy analysis developed from a sample of small wind turbines available on the mark…
Introduction of Offshore Wave, Wind and Solar Energies in Vietnam
2020
In Vietnam, the energy demand shows an ever-increasing trend. To limit the utilization of fossil fuels and the following consequences for the environment, renewable energy sources must be adopted. In this context, the paper assesses the utilization of offshore wind and sea wave, by considering a commercial wind turbine and a prototypical wave energy converter. Solar energy can be optionally also collected by this device. An algorithm is introduced to find the best composition of the three sources able to cover a desired share of energy demand. The approach is applied to Ca Mau, a province in the southern part of Vietnam. Finally, the results encourage the adoption of these energy sources th…
Feasibility analysis and study of a grid-connected hybrid electric system: Application in the building sector
2016
This paper represents the feasibility study and analysis of a grid-connected hybrid (PV-Wind) system with battery, realized within the project DE.DU.ENER.T and installed in the research centre CRTEn located in the northern Tunisia in the city of Borj-Cedria. The main objective of this work is to exploit renewable sources of electrical energy production to electrify the desired building. So, to minimize electricity consumption costs, reduce the adverse effects of pollutants products from the diesel power systems and sometimes happen to sell the surplus of energy produced. The HOMER (Hybrid Optimization Model of Electric Renewable) software is used to estimate system size and its performance …